- 收藏
- Product Details
Uses:
The device is to simulate the atmospheric ozone and strengthen the conditions for testing rubber products under the conditions of life of ozone, rapid identification and evaluation of rubber anti-aging properties of ozone and ozone-resistant protective agent performance method, and then take effective anti-aging measures to improve the life of rubber products. after the test, pass test to determine the performance of the product is able to meet the requirements for product design in order to improve, test and factory inspection use.
The main parameters:
Model | QL-100 | QL-150 | QL-250 | QL-408 | QL-500 | QL-800 | QL-010 | |
| Studio size mm | D | 400 | 500 | 500 | 600 | 700 | 800 | 1000 |
| W | 500 | 600 | 600 | 800 | 800 | 1000 | 1000 | |
| H | 500 | 500 | 810 | 850 | 900 | 1000 | 1000 | |
| outside size mm | D | 900 | 1000 | 1100 | 1200 | 1200 | 1300 | 1500 |
| W | 1000 | 1100 | 1200 | 1350 | 1400 | 1500 | 1500 | |
| H | 1650 | 1650 | 1850 | 1900 | 2000 | 2100 | 2100 | |
| Temperature range | 20~60℃ | |||||||
| Temperature fluctuation degree | ±0.5℃ | |||||||
| Temperature uniformity | ±0.2℃ | |||||||
| Humidity range | 50~95%RH | |||||||
| Humidity uniformity | +2、-3% RH | |||||||
| Gas flow rate | 12-16mm/S | |||||||
| Ozone generator | ilent type high pressure discharge | |||||||
| Ozone concentration | 50～1000PPhm（Low concentration） 100～500PPm（High concentration） | |||||||
| Stretching rack rate | 2mm/min | |||||||
| Fixture elongation | 5%～45% | |||||||
| The
outer | A3 steel electrostatic spraying | |||||||
| Within the box material | SUS304 stainless steel plate | |||||||
| Test methods | Static, dynamic | |||||||
| Circulatory system | Round robin, centrifugal fans, Split duct structure | |||||||
| Controller | Touch LCD programmable controller | |||||||
| Protector | Overtemperature protection、Overpressure protection、Water protection、phase protection、Leakage Protection | |||||||
| Power V | 380V 50HZ | |||||||
| Total power KW | 5 | 6 | 7 | 8 | 9 | 11 | 13 | |
| Meet the standards | GB/T 7762-2003 GB/T 2951.1-2008、GB/T2951.21-2008、IEC60811-2-1-2001 | |||||||
